Troubleshooting

The pad switches functions unreliably or incorrectly

First, check whether the KLM is configured correctly. Open the system settings and check the entries "Assignment K1" and "Assignment K2".

Press the keys in the following order and check whether the values each decrease by 14.5%, starting from the top left with 100, 85.5, 71, 56.5, 42, 27.5% or from the top right with -100, -85.5, -71, -56.5, -42, -27.5%.

image18.png

If one of the second values (85.5% / -85.5%) is greater than 90% / -90%, the output is too high. If one of the second values (30% / -30%) is less than 15%, please follow section 5.11.

Also enter the percentage values for high beam and fog lights in the system settings of the KLM (see chapter 5.9).

The pad is connected, but no value changes in the live data

Check whether the pad is connected correctly and the correct receiver output is used. A directly connected servo should move when a button is pressed.