Turn signals and cornering lights respond reversed: Channels are not calibrated.
Reverse light is on when driving forward: Channels are not calibrated.
Steering servo rotates the wrong way: Adjust the rotation direction after calibration with ControlPanel. Changes in the transmitter will be overwritten during calibration.
Lighting functions cannot be controlled: Check if the model is operational (battery charged, transmitter and model turned on). Check wiring and connect the speed controller directly to the receiver to rule out errors.
Lighting system operational? Green LED blinks twice briefly after powering on.
Channels calibrated? Calibration is necessary to define end positions and rotation directions.
Calibration not possible: Check connection and function of all channels with a servo. Use the live data assistant to verify channel movements.
No connection to PC: Driver installed? Model turned on and connected via USB? Correct COM port selected?
Module not found after update: Close ControlPanel, restart the model (disconnect battery), try the update again.
No damaged module displayed: Disconnect all modules from the bus, restart ControlPanel, connect the problematic module and reconnect.