Turn signals and cornering lights respond reversed: Channels are not learned.
Reverse light stays on when driving forward: Channels are not learned.
Steering servo rotates incorrectly: Correct rotation direction after learning with ControlPanel. Changes in the transmitter are overwritten during learning.
Light functions cannot be controlled: Check if the model is operational (battery charged, transmitter and model switched on). Check wiring. Test the speed controller directly on the receiver without the light assistant.
No response after switching on: Green LED should blink twice briefly. Channels must be learned.
Learning channels not possible: Check connection and function of all channels with a servo. Use the LiveData assistant to verify channel movements.
No connection to PC: Check driver installation, model switched on and USB connected, correct COM port selected.
Module not found after update: Close ControlPanel, restart system, try update again. If problems persist, disconnect all modules except the affected one.