Schaltbausteine/Decoder

KIEB 6/2/2 Infrared Receiver for EasyBus TrailersThe KIEB 6/2/2 infrared receiver serves as the central communication module for EasyBus trailers, reliably receiving all data from RS1, KLM, or KIES transmitters. It wirelessly transmits all lighting, switching, and proportional functions and outputs them via integrated outputs or the EasyBus to lighting boards and expansion modules. This makes it suitable for various trailer types, including tippers, low loaders, and specialized body configurations.The receiver provides six powerful 500 mA switching outputs, two servo outputs, and two motor outputs, enabling precise control of lighting and mechanical functions such as trailer supports, spindle drives, bodies, or ramps. Additional servos or controllers, such as brushless controllers for modern hydraulic pumps, can be operated via the servo outputs. LEDs can be connected directly to the switching outputs with appropriate resistors (e.g., 180 Ohm). The three EasyBus outputs allow connection to additional lighting boards and expansion modules.The maximum operating range is approximately 1.5 m, with an opening angle of up to 90° to the sending diode. Reception sensitivity is adjustable via an integrated potentiometer, while transmission power can be set on the RS1, KLM, or KIES transmitter.FunctionsReceives all control data from the infrared transmitter (RS1, KLM, or KIES)Two motor outputs for controlling trailer supports, spindle drives, bodies, or rampsTwo freely programmable servo outputs for steering axles, lift axles, locks, or controllersSix 500 mA switching outputs for additional lighting or rotating beaconsThree EasyBus outputs for expansion with lighting boards and modulesLED operation directly via switching outputs with appropriate resistors (e.g., 180 Ohm)Range up to 1.5 m, maximum angle to sending diode 90°Integrated potentiometer for fine adjustment of reception sensitivityAdjustable transmission power on RS1, KLM, or KIESFeaturesCompact dimensions: 60 mm × 40 mm × 12.5 mmNo integrated BEC – battery voltage is present on the servo outputs (see tip 1)Scope of DeliveryKIEB 6/2/2 infrared receiver30 cm receiving diode60 cm double connection cable for connection to the tractor for adjustments

KIES Infrared TransmitterThe KIES Infrared Transmitter is a module designed for precise and versatile control of models. It enables simple and reliable transmission of lighting functions, switch states, and servo movements.FunctionsPlug & Play: easy connection and immediate operational readinessServo output for controlling the saddle plateReliable transmission of all lighting functions and switch statesSupports all proportional functions for detailed controlRange up to 1.5 meters with a transmission angle up to 90°Control of servos on trailers, such as steering axlesControl of motor functions on trailers, including supportsSpecial FeaturesSimple expansion of the power plant systemConnection via free EasyBus outputRecommended positioning of the emitting diode on the kingpinOperation over distances greater than one meter and angles up to 90°Five selectable transmission power levels adjustable via system settingsServo output preset for saddle plate control, adjustable as requiredLieferumfangKIES Infrared Transmitter

KLB 12 Roof Extension for the EasyBus SystemThe KLB 12 Roof Extension from the KraftwerK-KLB series expands the EasyBus system with twelve versatile switching outputs. The module is specifically designed for the roof area of your model and offers eight LED outputs with integrated resistors (20 mA), four high-current outputs (each 500 mA) for more powerful consumers, as well as a servo output for controlling rotating beacons or mechanical roof functions. Additionally, RGB LEDs can be directly controlled for interior lighting.Functions12 switching outputs8 LED outputs with integrated resistors (20 mA)4 high-current outputs (each 500 mA)Servo output for rotating beacons or mechanical roof functionsDirect control of RGB LEDs for interior lightingPower supply via EasyBus (BEC 5–6 V)Compact design (23 x 31 x 13 mm)30 cm plug-in connection cableCompatible with KraftwerK KLM, RS1, and Beier SFR-1 / USM-RC3Freely combinable with all KraftwerK modulesEasy configuration via KraftwerK ControlPanelNo programming skills requiredFree PC software availableSpecial FeaturesSupports all common lighting functions from the original vehicle sector as well as various effect lightingFront light (parking light, low beam, high beam, flash light, fog lights) including all combinationsRear light (parking light, brake light, rear fog light) including all combinationsDaytime running light with optional automatic dimming when indicators or headlights are activeCornering lightCurve lightReversing lightIndicators and hazard lightsUS indicators (indicator + rear light via one LED)US rear light (indicator + rear light + brake light via one LED)Strobe with adjustable flash count, speed, and repetition rateRunning light with any number of LEDsRotating beacon (single LED or via servo output)Knight Rider effect with any number of LEDsIndividually adjustable brightness, on/off speed, and blink on/off timesScope of DeliveryKraftwerK KLB 12 Roof Extension

KLB 12-20 Switch Expansion by KraftwerKThe KraftwerK KLB 12-20 switch expansion supplements the EasyBus system with twelve LED switching outputs featuring integrated 20 mA resistors. The module is ultra-compact, measuring only 19.5 × 9 mm. It uses solder pads instead of screw terminals, facilitating installation in tight or hard-to-reach areas. This switch expansion is suitable for versatile and precise lighting installations.FunctionsTwelve LED outputs with integrated 20 mA resistorsDirect connection of LEDs without additional electronicsPower supply via EasyBus (BEC 5–6 V)30 cm soldered connection cableCompatible with KraftwerK KLM, RS1 as well as Beier SFR-1 / USM-RC3Freely combinable with all KraftwerK modulesSimple configuration via KraftwerK ControlPanelNo programming knowledge requiredFree PC software availableSpecial FeaturesUltra-compact design: 19.5 × 9 mmSolder pads instead of screw terminals for tight installationSupports all common lighting functions and numerous effect lighting optionsIndividual adjustment of brightness, on/off speed, and blink timesScope of DeliveryKraftwerK KLB 12-20 LED expansion module

KLB 8 Switch Extension for EasyBus SystemThe KraftwerK KLB 8 module expands the EasyBus system with flexible switch outputs. It combines six LED outputs with integrated resistors (20 mA) and two high-current outputs (500 mA) in a compact housing. With dimensions of 28 × 15 × 12 mm, the module is suitable for installation in models that require both fine LED lighting and powerful consumers.FunctionsSix LED outputs with integrated resistors (20 mA)Two high-current outputs (500 mA each)Direct connection of LEDs without additional electronicsPower supply via EasyBus (BEC 5–6 V)Easy configuration via the KraftwerK ControlPanelFree PC software availableFeaturesCompact design: 28 × 15 × 12 mm30 cm connection cable, neatly solderedCompatible with KraftwerK KLM, RS1, and Beier SFR-1 / USM-RC3Freely combinable with all KraftwerK modulesNo programming skills requiredScope of deliveryKLB 8 Switch ExtensionSupported light functionsFront light (parking light, low beam, high beam, flash, fog light) including all combinationsRear light (parking light, brake light, fog rear light) including all combinationsDaytime running light (optional with automatic dimming when indicating or driving light)Turning lightCornering lightReverse lightIndicators and hazard lightsUS indicators (indicator + rear light via one LED)US rear light (indicator + rear light + brake light via one LED)Strobe (flash count, speed, and repeat rate adjustable)Running lightAll-around lightKnight Rider effectIndividual adjustment of brightness, on/off speed, and blink on/off times

KLB 8-20 Switch Extension with Integrated Series ResistorsThe KLB 8-20 switch extension expands the EasyBus system by adding eight compact switching outputs with integrated series resistors. These outputs enable the direct connection of LEDs without the need for additional electronic components. Its small design allows for space-saving installation, making it especially suitable for fine lighting details in model building.FunctionsEight LED switching outputs with integrated series resistorsDirect LED connection without additional componentsMaximum output load of 20 mA per channelPower supply via EasyBus (BEC 5–6 V)Supports various lighting functions from original vehicle applications and effect lightingIndividual configuration of brightness, switch-on/off speed, and blink on/off timesSpecial FeaturesCompact dimensions: 28 × 15 × 12 mm30 cm connection cable, solderedCompatible with KraftwerK KLM, RS1, and Beier SFR-1 / USM-RC3Can be combined freely with other KraftwerK modules, including additional KLB unitsIntuitive settings via KraftwerK ControlPanelNo programming knowledge requiredFree PC software availableScope of DeliveryKraftwerK KLB 8-20 switch extension

KLM 4/16 Light Assistant for the EasyBus SystemThe KLM 4/16 Light Assistant is the successor to the KLM 4/12-500, combining a compact design with easy operation and broad compatibility. It serves as a universal light assistant for nearly all common speed controller and sound module systems and offers extensive expansion options via EasyBus.FunctionsPlug-and-play – ready to use immediatelyCompatible with all common sound modulesSupports all forward/reverse speed controllers (with or without brake)Limited compatibility with Tamiya MFU/MFCExpandable with numerous lighting boardsIntegrated infrared transmitter for trailer lightingFlexible adjustment via PC software to the prototypeNo programming knowledge requiredFree PC software KraftwerK ControlPanel availableSpecial FeaturesCompact housing measuring 52 × 36 × 13 mm8 high-current outputs (each 500 mA)8 LED switching outputs with integrated resistors (20 mA)4 adjustable servo outputs4 servo inputs (alternatively via CPPM, SBUS, IBUS, DATA)6 analog inputsInfrared output for trailer lightingMini USB port for configuration only5 bus outputs for expansions with switching, servo, or motor functionsConnection via four receiver channels: throttle, steering, K1, and K2 for light controlAll outputs fully configurable via PC softwareSupports numerous lighting functions including front light, rear light, indicators, hazard lights, US indicators, multi-flasher, running light, rotating beacon, Knight-Rider effectAdjustable brightness, on/off speed, and blink timesCompatible with standard speed controllers, Servonaut cruise control regulators, and common sound modulesScope of DeliveryKraftwerK KLM 4/16 Light Assistant

KraftwerK KLB 8‑500 – Switch Extension for the EasyBus System The KraftwerK KLB 8‑500 module expands the EasyBus system with eight high-current drivers with a load capacity of up to 500 mA. The switch extension allows for a flexible and powerful addition to the EasyBus system. Features Eight high-current outputs of 500 mA each for easy expansion of the EasyBus system Power supply directly via EasyBus (BEC 5–6 V) Compact design (28 x 23 x 12 mm) for versatile installation 30 cm connection cable, pre-soldered for quick installation Compatible with KraftwerK KLM, RS1, and Beier SFR‑1 / USM‑RC3 Can be combined with other KraftwerK modules, including additional KLB-8 units Easy configuration via the KraftwerK ControlPanel without programming knowledge Free PC software available for convenient settings Special Features Supports common lighting functions from the original vehicle sector Front light system including parking light, low beam, high beam, flash, and fog lights with all combinations Rear light with parking light, brake light, and fog light including all combinations Optional daytime running lights with automatic dimming when turn signals or headlights are on Indicator light and cornering light for increased safety Reverse lights for better visibility when reversing Flexible turn signal and hazard light function US turn signals and US rear lights with LEDs for authentic lighting Strobe light with adjustable flash count, speed, and repeat rate Chaser light and rotating light for various lighting effects Knight Rider effect for individual LED control Fine adjustment of brightness, on/off speed, and flash times possible Scope of Delivery KraftwerK KLB 8‑500 Switch Extension

KSB2 Servo ControlThe KSB2 Servo Control expands the EasyBus system with two flexibly configurable servo outputs.FunctionsPlug & Play solutionTwo additional servo outputsAdjustable via ControlPanelProportional functions (e.g., for steering servos)Digital functions (e.g., fifth wheel coupling, ramp or flap control)Adjustable center positions, rotation speeds, and rotation directionsNo programming knowledge requiredFree PC software available for downloadProportional functionSwitchable proportional functionTwo positionsTwo positions with center positionActuatorHydraulic simulationFifth wheel plateTrailer supportsDump controlWindshield wipersSearchlightsSpecial FeaturesAttention to the total current consumption of the system and the current capacity of the EasyBus line is requiredHigh-power digital servos may be underpowered and cause disturbances throughout the bus systemScope of DeliveryKSB2 Servo Control

KSB4 Servo Control The KSB4 servo control expands your EasyBus system with four freely configurable servo outputs. Functions Proportional function Switched proportional function Two positions Two positions with center position Actuator Hydraulic simulation Fifth wheel plate Trailer supports Dump bed Windshield wiper Searchlight Special features Plug & Play solution Four additional servo outputs Adjustable via ControlPanel Proportional functions (e.g., for steering servo) Digital functions (e.g., fifth wheel coupling, ramp or flap control) Adjustable center positions, rotation speeds, and rotation directions No programming skills required Free PC software available for download Connects to EasyBus line and a free receiver output or external BEC to reduce load on EasyBus line Scope of delivery KSB4 Servo Control