Mercedes

Light Chamber Divider Grid for TAMIYA Mercedes MB 1838 & MB 1850The light chamber divider grids for the TAMIYA Mercedes MB 1838 and MB 1850 models allow removal of the light chamber partition strips in the original rear lights. This enables the use of Kraftwerk circuit boards.The divider grids realistically split the light chambers into five compartments, matching the original design, unlike the three chambers provided by TAMIYA by default.Additionally, the divider grids restore the mounting points for the rear light lens, preserving the original fittings.Delivery ContentsLight chamber divider grid for TAMIYA Mercedes MB 1838 & MB 1850

RS1 Full Option Set Tamiya MB Actros 1851The RS1 Full Option Set for the Tamiya MB Actros 1851 is a compact electronics system that integrates driving function, sound, and advanced lighting. The RS1 module combines the speed controller, sound module, and light control, connecting all lighting components through the KraftwerK EasyBus into a modular expandable system.The headlights are equipped with LEDs for low beam, high beam, daytime running lights, and fog lights. Additionally, side marker lights with integrated LEDs are provided, connected to the headlights.FunctionsIntegration of speed controller, sound module, and light control in the RS1 moduleLED light boards for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsConnection of all lighting components via KraftwerK EasyBusFeaturesCompact, modular expandable electronics systemComplete integration of all components into the EasyBusScope of DeliveryRS1 control unitFront light boardsRear light boards4 Ohm speaker

RS1 Full Option Set Tamiya MB Actros 3363The RS1 Full Option Set for the Tamiya MB Actros 3363 is a compact electronic system that integrates driving functions, sound, and advanced lighting. The RS1 module combines the speed controller, sound module, and light control, connecting all lighting components via the KraftwerK EasyBus into a modular and expandable system.The headlights feature LEDs for low beam, high beam, daytime running lights, and fog lights. Side marker lights with integrated LEDs are also connected to the headlights.The roof lighting includes the KLB12 roof module with 5 white LEDs for the roof light bar and 2 LEDs for the clearance lights. Optional rotating beacons, a servo, or servo-controlled rotating beacons or warning bars can be operated via the 500mA outputs. The roof components are centrally controlled via the KLB12 and fully integrated into the EasyBus.The front lighting consists of the KLB8 module, grill lights, and several LEDs. This Full Option Set offers a comprehensively integrated electronic system equipping the Tamiya MB Actros 3363 with extensive functions.FunctionsIntegration of speed controller, sound module, and light control in the RS1 moduleLED headlights for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsRoof lighting controlled via KLB12 roof module including LEDsFront lighting with KLB8 module and LEDsConnection of all lighting components via KraftwerK EasyBusSpecial FeaturesCompact, modular expandable electronic systemCentral control of roof lighting via KLB12 moduleComplete integration of all components into the EasyBusScope of DeliveryRS1 control unitFront light boardsRear light boardsRoof lighting including KLB12 roof module and 7 white LEDsFront lighting including KLB8 module, grill lights, and LEDs4 Ohm speaker

RS1 Full Option Set Tamiya MB Arocs 3348/4151The RS1 Full Option Set for the Tamiya MB Arocs 3348/4151 is a compact electronic system that integrates drive function, sound, and advanced lighting. The RS1 module combines the speed controller, sound module, and light control, linking all lighting components through the KraftwerK EasyBus into a modular expandable system.The headlights are equipped with LEDs for low beam, high beam, daytime running lights, and fog lights. Additionally, side marker lights with integrated LEDs are available, connected to the headlights.FunctionsIntegration of speed controller, sound module, and light control in the RS1 moduleLED headlights for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsConnection of all lighting components via KraftwerK EasyBusFeaturesCompact, modular expandable electronic systemComplete integration of all components into the EasyBusScope of DeliveryRS1 control unitFront light boardsRear light boards4 Ohm speaker

RS1 Full Option Set Tamiya MB Arocs 3363The RS1 Full Option Set for the Tamiya MB Arocs 3363 is a compact electronic system that integrates driving function, sound, and advanced lighting. The RS1 module combines the speed controller, sound module, and light control, connecting all lighting components via the KraftwerK EasyBus into a modular expandable system.The headlights are equipped with LEDs for low beam, high beam, daytime running lights, and fog lights. Additionally, there are side marker lights with integrated LEDs that are connected to the headlights.FunctionsIntegration of speed controller, sound module, and light control in the RS1 moduleLED headlights for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsConnection of all lighting components via KraftwerK EasyBusFeaturesCompact, modular expandable electronic systemComplete integration of all components into the EasyBusScope of deliveryRS1 control unitFront light boardsRear light boards4 Ohm speaker

RS1 Full Option Set TAMIYA MB Mercedes 1838 and 1850LThe RS1 Full Option Set for the Tamiya MB Mercedes 1838 and 1850L includes a compact electronic system combining driving control, sound, and advanced lighting. The RS1 module integrates the speed controller, sound module, and light control, connecting all lighting components via the KraftwerK EasyBus into a modular expandable system.The headlights are equipped with LEDs for low beam, high beam, daytime running lights, and fog lights. Additionally, side marker lights with integrated LEDs are connected to the headlights.FunctionsIntegration of speed controller, sound module, and light control in the RS1 moduleLED light boards for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsConnection of all lighting components via KraftwerK EasyBusSpecial featuresCompact, modular expandable electronic systemComplete integration of all components into the EasyBusScope of deliveryRS1 control unitFront light boardsRear light boards4 Ohm speaker

Light Boards for TAMIYA MB Actros 1851 Front These light boards are specially designed for the TAMIYA Mercedes-Benz Actros 1851 and are operated via the KraftwerK EasyBus. They provide all essential lighting functions and replace the original lighting with a modern, powerful solution featuring a distinctive xenon effect in the driving lights. Each LED can be individually adjusted via the KraftwerK ControlPanel. Additionally, special effects such as strobe and flash effects are available, which can be configured as a secondary function. The boards include bright white 3-mm and 5-mm LEDs, precisely fitting into the original chrome reflectors of the Actros. Separate wired LEDs control the position lights, side indicators, and side marker lights. The scope of delivery includes 2×3 wired yellow LEDs already soldered to the light boards. Since the Actros 1851 does not have a lamp bracket, no separate roof lighting is necessary. All essential front and position lighting functions are fully covered by the light boards and supplied LEDs. Functions All essential front lighting functions for the TAMIYA MB Actros 1851 Individual LED control via KraftwerK ControlPanel Configurable strobe and flash effects as secondary functions Operation via KraftwerK EasyBus Bright white 3-mm and 5-mm LEDs for driving lights with xenon effect Separate LEDs for position lights, side indicators, and side marker lights Special Features Precisely fits original chrome reflectors of the Actros 1851 2×3 wired yellow LEDs already soldered Ready-to-install, preassembled light boards No separate roof lighting required Distinctive xenon effect in driving lights Scope of Delivery 1× set of light boards for TAMIYA MB Actros 1851 (front) 2×3 wired LEDs for position lights, side indicators, and side marker lights

TAMIYA MB Actros 1851/3363 Rear Light BoardsThe set includes two ready-to-install lighting boards for upgrading the original rear lights on the TAMIYA MB Actros 1851/3363.FunctionsParking light, brake light, tail light, rear fog lightTurn signals, hazard lightsReverse lightOptional lamp effect for realistic simulation of an aged vehicleReady-to-install lighting boards for rear light upgradesDelivery ContentsTwo ready-to-install lighting boards

TAMIYA MB Actros 3363 Front Lighting The front lighting for the TAMIYA MB Actros 3363 includes a KLB 8-20 controller and four white 3mm LEDs. This set significantly simplifies wiring and allows easy removal of the cab by disconnecting only the plug connector without detaching the LEDs. The KLB 8-20 can be mounted with double-sided adhesive tape. The LEDs have short cables: the blue wires are for the positive pole and are connected together to the positive output of the KLB, while the four black wires connect to the switching outputs. Each output can be configured individually and offers common functions such as parking light and high beam, as well as various flashing and running light modes. Additionally, further LEDs of any color can be connected and configured on the remaining outputs to enhance the appearance of the Actros 3363. Delivery Contents KLB 8-20 controller 4x white 3mm LEDs

Tamiya MB Actros 3363 Light Boards – Front, Compatible with KraftwerK EasyBus These light boards are specially designed for the TAMIYA Mercedes-Benz Actros 3363 (front) and operate via the KraftwerK EasyBus. They replace the original lighting with modern, high-performance technology and provide all relevant lighting functions. The driving light produces a distinctive xenon effect, while each LED can be individually controlled via the KraftwerK ControlPanel. Additionally, special effects such as strobe and flash effects can be configured as secondary functions. The boards are equipped with bright white 3-mm and 5-mm LEDs and fit precisely into the original chrome reflectors of the Actros. Each side also includes two orange LEDs serving as side indicators and side marker lights. These LEDs are permanently wired and already soldered to the boards. A special feature is the pluggable daytime running light board, which is mounted separately and significantly enhances the appearance of the Actros. Installation Instructions for the Daytime Running Light For installing the daytime running lights, the insert with the fog lights must be modified. The original LED holder is completely removed. Then, the slot for the daytime running light is carefully drilled out with a 1.5-mm drill, avoiding overheating of the material to prevent smearing. By moving the drill sideways, an elongated hole can be created. After drilling, the daytime running light board is glued in place, and the glass on the front is fixed. This ensures the daytime running light is securely and stably seated in the insert. For the roof lighting of the Actros 3363, a separate article is available: Roof Lighting Tamiya MB Actros 3363. Functions Light boards for the TAMIYA Mercedes-Benz Actros 3363 (front) Compatible with KraftwerK EasyBus operation Individually adjustable LEDs via KraftwerK ControlPanel Configurable strobe and flash effects as secondary functions Bright white 3-mm and 5-mm LEDs for optimal illumination Two orange LEDs per side as indicators and side markers, permanently wired Pluggable daytime running light board included Driving light with realistic xenon effect Precisely fitting original chrome reflectors Ready-to-install, pre-assembled light boards Special Features Separate, pluggable daytime running light board High-performance LEDs with individual control Realistic xenon effect for driving lights Accurate fit for original Actros chrome reflectors Contents 1× Set of light boards for TAMIYA MB Actros 3363 (front) 1× Pluggable daytime running light board

TAMIYA MB Actros 3363 Roof Lighting This roof lighting for the TAMIYA MB Actros 3363 includes a KLB 8-20 controller and seven white 3mm LEDs. Five LEDs are intended for the light bar, with one LED each illuminating the clearance lights. The set simplifies wiring and allows easy removal of the roof or cabin by disconnecting only the plug, without detaching the LEDs. The KLB 8-20 controller can be conveniently mounted using double-sided adhesive tape. The LEDs have short cables: the blue wires are connected together with the positive pole to the controller's positive output, while the seven black wires are connected to the individual switch outputs. Each output is individually programmable and offers standard functions such as parking lights and high beams, as well as various flashing and running light modes. Optionally, an additional LED in any color can be connected and configured to the remaining output, for example for interior lighting. Delivery Contents KLB 8-20 controller 7x white 3mm LEDs

TAMIYA MB Arocs 3348/4151 Rear Light PCBsThe set includes two ready-to-install lighting PCBs for retrofitting the original rear lights on the TAMIYA MB Arocs 3348/4151.FunctionsParking light, brake light, tail light, rear fog lightTurn signal, hazard warning lightsReverse lightOptional lamp effect for realistic representation of aged vehicleReady-to-install lighting PCBs for rear light retrofitDelivery ContentsTwo ready-to-install lighting PCBs

TAMIYA MB Arocs 3363 Rear Light Circuit BoardsThe set includes two ready-to-install lighting circuit boards for upgrading the original rear lights on the TAMIYA MB Arocs 3363.FunctionsParking light, brake light, rear light, rear fog lightTurn signals, hazard lightsReverse lightOptional lamp effect for realistic representation of an aged vehicleReady-to-install lighting circuit boards for rear light upgradeDelivery ContentsTwo ready-to-install lighting circuit boards

Light Boards for TAMIYA MB Arocs 3363 / 3348 / 4151 Front Light Boards – Compatible with KraftwerK EasyBus These light boards are specifically designed for the TAMIYA Mercedes-Benz Arocs models 3363, 3348, and 4151 and are operated via the KraftwerK EasyBus. They provide all relevant lighting functions and replace the original lighting with a modern, high-performance solution featuring a distinctive xenon effect in the driving lights. Each LED can be individually adjusted using the KraftwerK ControlPanel. In addition to the classic lighting functions, extended effects such as strobe and flash effects are available, which can be configured as a secondary function. The boards are equipped with bright white 3-mm and 5-mm LEDs that fit precisely into the original chrome reflectors of the Arocs. Separate wired LEDs additionally control position lights, side indicators, and side marker lights. All LEDs are pre-assembled and firmly attached to the light boards. For the Arocs 4151 model, a lamp bracket is included, allowing the use of the Actros roof lighting. In this case, the uppermost LED for the front position lights on the light board must be disconnected, as this function is already integrated into the roof lighting. There is no daytime running light on the Arocs, so no separate daytime running light board is included. Functions All relevant lighting functions for TAMIYA MB Arocs 3363, 3348, and 4151 front boards Operation via KraftwerK EasyBus Individual LED adjustment via KraftwerK ControlPanel Configurable strobe and flash effects as secondary functions Features Bright white 3-mm and 5-mm LEDs for optimal illumination Separate wired LEDs for position lights, side indicators, and side marker lights No daytime running light included Compatible with Actros roof lighting on model 4151 (upper position LED must be disconnected) Exact fit for original chrome reflectors Pre-assembled, ready-to-install light boards Scope of Delivery 1 set of light boards for TAMIYA MB Arocs 3363, 3348, 4151 front Pre-assembled, wired LEDs for position lights, side indicators, and side marker lights

Light Boards TAMIYA Mercedes 1838LS / 1850L Front – for KraftwerK EasyBus These light boards are specifically designed for the TAMIYA Mercedes 1838LS and 1850L front models and are operated directly via the KraftwerK EasyBus. They provide all relevant lighting functions and replace the original lighting with a modern, reliable solution. Equipped with 3mm and 5mm LEDs, the boards fit precisely into the original chrome reflectors of the Mercedes front. The warm white light color is matched to the model and ensures realistic and consistent illumination. Features Light boards for TAMIYA Mercedes 1838LS / 1850L front Exclusive operation via KraftwerK EasyBus Integration of all lighting functions 3mm and 5mm LEDs for optimal light distribution Precisely fitting original chrome reflectors Warm white LEDs matched to the model Ready-to-install, pre-assembled boards Scope of Delivery 1× Set of light boards for TAMIYA Mercedes 1838LS / 1850L front

TAMIYA Volvo FH12 Rear Light Circuit BoardsThe set includes two ready-to-install lighting circuit boards and two light chamber separation grids for realistic retrofitting of the original rear lights.The light chamber separation grids allow the removal of the light chamber dividers in the original rear lights to enable the installation of the KraftwerK circuit boards. They realistically divide the light chambers into five chambers, corresponding to the original, in contrast to the three chambers provided by TAMIYA as standard. Additionally, the separation grids restore the mounting points for the rear light glass, preserving the fittings.Delivery ContentsTwo ready-to-install lighting circuit boardsTwo light chamber separation grids