Beleuchtung

EasyBus Circuit Boards for Veroma Euro Tail LightsEasyBus circuit boards for Veroma Euro tail lights are high-quality lighting boards designed specifically for the 7-chamber tail light from Veroma.Each module is equipped with seven powerful SMD LEDs and includes an output with an integrated resistor on the rear side. This output allows flexible assignment, for example, for marker lights or license plate illumination.The boards connect directly to the EasyBus outputs of the light assistants and are easy to plug in and immediately operational.All eight outputs can be individually adjusted using the Kraftwerk ControlPanel to optimally meet the requirements.Note: Due to the use of larger and brighter LEDs, the rear cover of the lamp housing must be removed. This eliminates the mounting holes, so the lamp housing must be glued to the model.FunctionsEquipped with seven powerful SMD LEDsOutput with integrated resistor on the rear sideFlexible output assignment, e.g., for marker lights or license plate illuminationDirect connection to EasyBus outputs of the light assistantsIndividual adjustment of all eight outputs via Kraftwerk ControlPanelSpecial FeaturesUse of larger and brighter LEDsRemoval of the lamp housing rear cover requiredMounting holes eliminated, lamp housing must be glued to the modelScope of DeliveryEasyBus circuit boards for Veroma Euro tail lights

EasyBus Lighting System TrailerThe EasyBus lighting system for trailers is a fully integrated, modern, and powerful lighting solution designed for model trailers. It operates as a true plug-and-play system that is easy to connect, pair, and use immediately. All lighting, switching, and proportional functions are transmitted wirelessly and without delay from the tractor unit, reliably over distances up to 1.5 meters.The system receives all information from the tractor unit, including lighting functions, switching states, and proportional controls. Transmission is effective within an angle of up to 90°. Lighting boards can be connected directly via EasyBus without requiring additional modules or adapters.The central component is the KIEB 6/2/2 module, featuring six 500 mA switching outputs, two servo outputs, and two motor outputs. Motor outputs can be used to operate trailer supports, dump beds, or other drives. Servo outputs can be utilized for steerable axles or brushless controllers for hydraulic pumps. For LED operation on switching outputs, series resistors (e.g., 180 ohms) are required. Three EasyBus outputs allow connection of additional expansion modules.The lighting system is flexibly expandable and can be seamlessly integrated into existing EasyBus systems. It is suitable for all trailer types, including tipper, low loader, and timber transporter.FunctionsPlug-and-play: easy to connect and operateOne pair of motor outputs for trailer supports, dump beds, or other drivesTwo freely configurable servo outputs, e.g., for steerable axles or controllersCompatible with brushless controllers for hydraulic pumpsReceives all lighting, switching, and proportional functions from the tractor unitRange up to approx. 1.5 m or an angle of up to 90°Direct connection of lighting boards via EasyBus without additional modulesThree EasyBus outputs for expansion with modulesLED operation on switching outputs requires series resistors (e.g., 180 ohms)Special FeaturesIntegrated KIEB 6/2/2 module with 6 switching outputs, 2 servo, and 2 motor outputsSeamless integration into existing EasyBus systemsSuitable for all trailer types such as tipper, low loader, and timber transporterScope of DeliveryKIEB 6/2/2 module (6× 500 mA switching outputs, 2× servo outputs, 2× motor outputs)Veroma Euro rear light boardsVeroma Euro housing (mechanically processed)

EasyBus Lighting System Trailer KöBoThe EasyBus Lighting System Trailer KöBo is an integrated lighting solution designed for model assemblies with plug-and-play functionality, enabling quick connection, coupling, and immediate commissioning.All light, switch, and proportional functions are transmitted wirelessly, reliably, and without delay from the towing vehicle, even over distances up to 1.5 meters and angles up to 90°.The system comprehensively receives control information from the towing vehicle, including all lighting functions, switch states, and proportional functions. Lighting boards can be connected directly via EasyBus without requiring additional modules or adapters.The central component is the KIEB 6/2/2 module with six 500 mA switch outputs, two servo outputs, and two motor outputs. The motor outputs control trailer supports or beds, while the servo outputs control servos and brushless controllers for hydraulic pumps.For operating LEDs on the switch outputs, series resistors (e.g., 180 Ohm) are required. Three EasyBus outputs provide additional expansion options.The lighting system is flexibly expandable and can be seamlessly integrated into existing EasyBus systems. It is suitable for all trailer types such as tippers, low loaders, and timber transporters.The delivery includes the kingpin, which securely holds the receiving diode, offers a low installation height, and is height adjustable.FunctionsPlug-and-play system for simple and fast commissioningMotor output pair for controlling trailer supports, beds, or other drivesTwo freely programmable servo outputs, e.g., for steerable axles or controllersCompatible with brushless controllers for hydraulic pumpsWireless transmission of all light, switch, and proportional functions from the towing vehicleRange up to approx. 1.5 m or angles up to 90°Direct connection of lighting boards via EasyBus without additional modulesThree EasyBus outputs for additional expansionsSeries resistors (e.g., 180 Ohm) required for LED operation on switch outputsSpecial FeaturesKIEB 6/2/2 module with 6× 500 mA switch outputs, 2× servo outputs, and 2× motor outputsMotor outputs for controlling trailer supports or bedsServo outputs for servos and brushless controllersLow installation height and height-adjustable kingpinScope of DeliveryKIEB 6/2/2 module (6× 500 mA switch outputs, 2× servo outputs, 2× motor outputs)Veroma Euro rear light boardsVeroma Euro housing (mechanically processed)Kingpin optimized for the receiving diode

KIEB 6/2/2 Infrared Receiver for EasyBus TrailersThe KIEB 6/2/2 infrared receiver serves as the central communication module for EasyBus trailers, reliably receiving all data from RS1, KLM, or KIES transmitters. It wirelessly transmits all lighting, switching, and proportional functions and outputs them via integrated outputs or the EasyBus to lighting boards and expansion modules. This makes it suitable for various trailer types, including tippers, low loaders, and specialized body configurations.The receiver provides six powerful 500 mA switching outputs, two servo outputs, and two motor outputs, enabling precise control of lighting and mechanical functions such as trailer supports, spindle drives, bodies, or ramps. Additional servos or controllers, such as brushless controllers for modern hydraulic pumps, can be operated via the servo outputs. LEDs can be connected directly to the switching outputs with appropriate resistors (e.g., 180 Ohm). The three EasyBus outputs allow connection to additional lighting boards and expansion modules.The maximum operating range is approximately 1.5 m, with an opening angle of up to 90° to the sending diode. Reception sensitivity is adjustable via an integrated potentiometer, while transmission power can be set on the RS1, KLM, or KIES transmitter.FunctionsReceives all control data from the infrared transmitter (RS1, KLM, or KIES)Two motor outputs for controlling trailer supports, spindle drives, bodies, or rampsTwo freely programmable servo outputs for steering axles, lift axles, locks, or controllersSix 500 mA switching outputs for additional lighting or rotating beaconsThree EasyBus outputs for expansion with lighting boards and modulesLED operation directly via switching outputs with appropriate resistors (e.g., 180 Ohm)Range up to 1.5 m, maximum angle to sending diode 90°Integrated potentiometer for fine adjustment of reception sensitivityAdjustable transmission power on RS1, KLM, or KIESFeaturesCompact dimensions: 60 mm × 40 mm × 12.5 mmNo integrated BEC – battery voltage is present on the servo outputs (see tip 1)Scope of DeliveryKIEB 6/2/2 infrared receiver30 cm receiving diode60 cm double connection cable for connection to the tractor for adjustments

KIES Infrared TransmitterThe KIES Infrared Transmitter is a module designed for precise and versatile control of models. It enables simple and reliable transmission of lighting functions, switch states, and servo movements.FunctionsPlug & Play: easy connection and immediate operational readinessServo output for controlling the saddle plateReliable transmission of all lighting functions and switch statesSupports all proportional functions for detailed controlRange up to 1.5 meters with a transmission angle up to 90°Control of servos on trailers, such as steering axlesControl of motor functions on trailers, including supportsSpecial FeaturesSimple expansion of the power plant systemConnection via free EasyBus outputRecommended positioning of the emitting diode on the kingpinOperation over distances greater than one meter and angles up to 90°Five selectable transmission power levels adjustable via system settingsServo output preset for saddle plate control, adjustable as requiredLieferumfangKIES Infrared Transmitter

Light Chamber Divider Grid for TAMIYA Mercedes MB 1838 & MB 1850The light chamber divider grids for the TAMIYA Mercedes MB 1838 and MB 1850 models allow removal of the light chamber partition strips in the original rear lights. This enables the use of Kraftwerk circuit boards.The divider grids realistically split the light chambers into five compartments, matching the original design, unlike the three chambers provided by TAMIYA by default.Additionally, the divider grids restore the mounting points for the rear light lens, preserving the original fittings.Delivery ContentsLight chamber divider grid for TAMIYA Mercedes MB 1838 & MB 1850

Lichtkammertrenngitter für TAMIYA Scania R470/R620Das Lichtkammertrenngitter für die Rückleuchten des TAMIYA Scania R470/R620 ersetzt die originalen Trennstege und ermöglicht den Einbau der Kraftwerk Platinen. Es bietet eine realistische Kammertrennung mit fünf Kammern statt der werkseitigen drei Kammern.Das Trenngitter stellt die notwendigen Befestigungspunkte für das Rückleuchtenglas wieder her, wodurch Funktion und Optik der Rückleuchte präzise und originalgetreu optimiert werden.LieferumfangLichtkammertrenngitter TAMIYA Scania R470/R620

Modified Housing for Veroma Euro Tail LightsThe housings are specially modified to enable precise and trouble-free installation of the EasyBus circuit boards for Veroma Euro tail lights.The modification results in the omission of mounting holes on the housing, as these are integrated into the circuit board.LieferumfangModified housing for Veroma Euro tail lights

Roof Lighting Tamiya Scania 770S 4x2The roof lighting set for the TAMIYA Scania 770S 4x2 includes all necessary components for precise and powerful illumination of the roof area.FunctionsPrecisely fitting roof lamps as replacements for the original partsSpecially developed KLB 12 roof control module for reliable operationFive pre-wired LEDs for the sun visorTwo pre-wired LED strips for lamp bracket and light boxControl of the roof lights via the outputs of the KLB 12 roof moduleFeaturesAll LEDs are neatly pre-wired and can be installed without modificationsOptimally matched to the Scania 770S for bright and even lightingClear separation of outputs for roof lamps (9&10), LED strips (11&12), and lamp bracket/position lights (1–5)Scope of Delivery1× pair of roof lamps as replacements for the original roof lamps1× KLB 12 roof control module5× wired LEDs for the sun visor1× LED strip for the lamp bracket1× LED strip for the light box

RS1 Full Option Set TAMIYA CascadiaThe RS1 Full Option Set for the TAMIYA Cascadia is a compact electronic system that integrates driving control, sound, and advanced lighting functions. The RS1 module combines a speed controller, sound module, and light control unit, connecting all lighting components via the KraftwerK EasyBus to form a modular and expandable system.The headlights include LEDs for low beam, high beam, daytime running lights, and fog lights. Additionally, side marker lights with integrated LEDs are connected to the headlights, enhancing the lighting setup.FunctionsIntegration of speed controller, sound module, and light control in the RS1 moduleLED light boards for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsConnection of all lighting components via KraftwerK EasyBusSpecial FeaturesCompact, modular expandable electronic systemComplete integration of all components into the EasyBusScope of DeliveryRS1 control unitFront light boardsRear light boards4 Ohm speaker

RS1 Full Option Set TAMIYA Grand HaulerThe RS1 Full Option Set for the TAMIYA Grand Hauler is a compact electronic system that integrates driving functions, sound, and advanced lighting. The RS1 module combines the speed controller, sound module, and light control, connecting all lighting components via the KraftwerK EasyBus into a modular and expandable system.The headlights include LEDs for low beam, high beam, daytime running lights, and fog lights. Additionally, side marker lights with integrated LEDs are connected to the headlights.FunctionsIntegration of speed controller, sound module, and light control in the RS1 moduleLED light boards for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsConnection of all lighting components via KraftwerK EasyBusSpecial FeaturesCompact, modular expandable electronic systemComplete integration of all components into the EasyBusScope of DeliveryRS1 control unitFront light boardsRear light boards4 Ohm speaker

RS1 Full Option Set TAMIYA MAN TGX 18.540 / 26.540The RS1 Full Option Set for the TAMIYA MAN TGX 18.540 / 26.540 is a compact electronics system that integrates driving function, sound, and advanced lighting. The RS1 module combines a speed controller, sound module, and lighting control, connecting all lighting components through the KraftwerK EasyBus into a modular expandable system.The headlights are equipped with LEDs for low beam, high beam, daytime running lights, and fog lights. Additionally, there are side marker lights with integrated LEDs that are connected to the headlights.FunctionsIntegration of speed controller, sound module, and lighting control in the RS1 moduleLED light boards for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsConnection of all lighting components via KraftwerK EasyBusFeaturesCompact, modular expandable electronics systemComplete integration of all components into EasyBusScope of deliveryRS1 control unitFront light boardsRear light boards4 Ohm speaker

RS1 Full Option Set Tamiya MB Actros 1851The RS1 Full Option Set for the Tamiya MB Actros 1851 is a compact electronics system that integrates driving function, sound, and advanced lighting. The RS1 module combines the speed controller, sound module, and light control, connecting all lighting components through the KraftwerK EasyBus into a modular expandable system.The headlights are equipped with LEDs for low beam, high beam, daytime running lights, and fog lights. Additionally, side marker lights with integrated LEDs are provided, connected to the headlights.FunctionsIntegration of speed controller, sound module, and light control in the RS1 moduleLED light boards for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsConnection of all lighting components via KraftwerK EasyBusFeaturesCompact, modular expandable electronics systemComplete integration of all components into the EasyBusScope of DeliveryRS1 control unitFront light boardsRear light boards4 Ohm speaker

RS1 Full Option Set Tamiya MB Actros 3363The RS1 Full Option Set for the Tamiya MB Actros 3363 is a compact electronic system that integrates driving functions, sound, and advanced lighting. The RS1 module combines the speed controller, sound module, and light control, connecting all lighting components via the KraftwerK EasyBus into a modular and expandable system.The headlights feature LEDs for low beam, high beam, daytime running lights, and fog lights. Side marker lights with integrated LEDs are also connected to the headlights.The roof lighting includes the KLB12 roof module with 5 white LEDs for the roof light bar and 2 LEDs for the clearance lights. Optional rotating beacons, a servo, or servo-controlled rotating beacons or warning bars can be operated via the 500mA outputs. The roof components are centrally controlled via the KLB12 and fully integrated into the EasyBus.The front lighting consists of the KLB8 module, grill lights, and several LEDs. This Full Option Set offers a comprehensively integrated electronic system equipping the Tamiya MB Actros 3363 with extensive functions.FunctionsIntegration of speed controller, sound module, and light control in the RS1 moduleLED headlights for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsRoof lighting controlled via KLB12 roof module including LEDsFront lighting with KLB8 module and LEDsConnection of all lighting components via KraftwerK EasyBusSpecial FeaturesCompact, modular expandable electronic systemCentral control of roof lighting via KLB12 moduleComplete integration of all components into the EasyBusScope of DeliveryRS1 control unitFront light boardsRear light boardsRoof lighting including KLB12 roof module and 7 white LEDsFront lighting including KLB8 module, grill lights, and LEDs4 Ohm speaker

RS1 Full Option Set Tamiya MB Arocs 3348/4151The RS1 Full Option Set for the Tamiya MB Arocs 3348/4151 is a compact electronic system that integrates drive function, sound, and advanced lighting. The RS1 module combines the speed controller, sound module, and light control, linking all lighting components through the KraftwerK EasyBus into a modular expandable system.The headlights are equipped with LEDs for low beam, high beam, daytime running lights, and fog lights. Additionally, side marker lights with integrated LEDs are available, connected to the headlights.FunctionsIntegration of speed controller, sound module, and light control in the RS1 moduleLED headlights for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsConnection of all lighting components via KraftwerK EasyBusFeaturesCompact, modular expandable electronic systemComplete integration of all components into the EasyBusScope of DeliveryRS1 control unitFront light boardsRear light boards4 Ohm speaker

RS1 Full Option Set Tamiya MB Arocs 3363The RS1 Full Option Set for the Tamiya MB Arocs 3363 is a compact electronic system that integrates driving function, sound, and advanced lighting. The RS1 module combines the speed controller, sound module, and light control, connecting all lighting components via the KraftwerK EasyBus into a modular expandable system.The headlights are equipped with LEDs for low beam, high beam, daytime running lights, and fog lights. Additionally, there are side marker lights with integrated LEDs that are connected to the headlights.FunctionsIntegration of speed controller, sound module, and light control in the RS1 moduleLED headlights for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsConnection of all lighting components via KraftwerK EasyBusFeaturesCompact, modular expandable electronic systemComplete integration of all components into the EasyBusScope of deliveryRS1 control unitFront light boardsRear light boards4 Ohm speaker

RS1 Full Option Set TAMIYA MB Mercedes 1838 and 1850LThe RS1 Full Option Set for the Tamiya MB Mercedes 1838 and 1850L includes a compact electronic system combining driving control, sound, and advanced lighting. The RS1 module integrates the speed controller, sound module, and light control, connecting all lighting components via the KraftwerK EasyBus into a modular expandable system.The headlights are equipped with LEDs for low beam, high beam, daytime running lights, and fog lights. Additionally, side marker lights with integrated LEDs are connected to the headlights.FunctionsIntegration of speed controller, sound module, and light control in the RS1 moduleLED light boards for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsConnection of all lighting components via KraftwerK EasyBusSpecial featuresCompact, modular expandable electronic systemComplete integration of all components into the EasyBusScope of deliveryRS1 control unitFront light boardsRear light boards4 Ohm speaker

RS1 Full Option Set Tamiya Scania 770S 4x2The RS1 Full Option Set for the Scania 770S 4x2 is a comprehensive electronics package that integrates driving functions, sound, and advanced lighting into a compact module. It combines the speed controller, sound module, and light control, connecting them via the kraftwerK EasyBus to all lighting components, ensuring a clean, reliable, and expandable system.FunctionsIntegration of speed controller, sound module, and light control in the RS1 moduleConnection via kraftwerK EasyBus with all lighting componentsHeadlights with LEDs for low beam, high beam, daytime running lights, and fog lightsLED strips for daytime running lights and indicators with wipe effectSide marker lights with wired LEDsIlluminated side panels with LEDs for chrome bars and marker lightsRoof lighting consisting of KLB12 roof module, Scania 770S roof lamps, LED strips for light box and roof lamp bar, as well as five LEDs for sun visorCentral control of roof components via the KLB12, fully integrated into the EasyBusIncludes Scania 770S 6x4 front lighting with KLB8, grille lamps, and four LEDsSpecial FeaturesFully integrated electronics system for the modelDetailed and function-rich designExpandable and reliable system through EasyBus connectionScope of DeliveryRS1 module with speed controller, sound module, and light controlLED headlights for low beam, high beam, daytime running lights, and fog lightsLED strips for daytime running lights and indicatorsWired side marker lightsIlluminated side panels with LEDsKLB12 roof module with Scania 770S roof lamps, LED strips for light box and roof lamp bar, five LEDs for sun visorScania 770S 6x4 front lighting with KLB8, grille lamps, and four LEDs

RS1 Full Option Set Tamiya Scania 770S 6x4The RS1 Full Option Set for the Scania 770S 6x4 offers a fully coordinated electronics package that integrates all essential lighting and sound functions. The RS1 control unit manages driving functions, sound, and all lighting modules precisely to ensure seamless operation of all components.The set includes vehicle-specific headlights and taillights, along with extended front and roof lighting, enhancing the model's appearance and providing realistic illumination. All modules are connected via the KraftwerK EasyBus, allowing for straightforward and reliable installation.The headlights are equipped with LEDs for low beam, high beam, daytime running lights, and fog lights. Additional LED strips provide daytime running lights and turn signals with a wipe effect, ensuring uniform front-area illumination. Side marker lights with wired LEDs are integrated and connected to the headlights.A distinctive feature is the illuminated side panels of the side skirts, which include LEDs in chrome strips and marker lights, creating an evenly lit appearance for the model.The roof lighting comprises the complete Scania 770S roof system, including the KLB12 roof module, roof lamps, position lamp LEDs, and LEDs for the light bar. These components are centrally controlled via the EasyBus and integrate seamlessly into the overall system.In addition, the front lighting for the Scania 770S 6x4 includes the KLB8, grill lamps, and four LEDs. This Full Option Set provides model builders with a high-quality, fully integrated electronics system that makes the Scania 770S 6x4 a detailed and functionally rich high-end model.FunctionsControls driving function, sound, and all lighting modulesIncludes vehicle-specific headlights and taillightsExtended front and roof lighting for realistic illuminationConnected via KraftwerK EasyBus for easy installationHeadlights with LEDs for low beam, high beam, daytime running lights, and fog lightsLED strips for daytime running lights and turn signals with wipe effectSide marker lights integrated and connected to headlightsIlluminated side skirts with chrome strip LEDs and marker lightsComplete roof lighting system with KLB12 module, roof lamps, position lamp LEDs, and light bar LEDsFront lighting including KLB8, grill lamps, and four LEDsSpecial FeaturesFully coordinated electronics package for synchronized operationRealistic and detailed lighting designCentral control via EasyBus for seamless integrationScope of DeliveryRS1 control unitScania 770S headlightsScania 770S 6x4 taillightsIlluminated side panels (chrome strips and marker lights)Scania 770S 6x4 roof lighting including KLB12 roof module, roof lamps, position lamp LEDs, and light bar LEDsScania 770S 6x4 front lighting including KLB8-20, grill lamps, and four LEDs4 Ohm speaker

RS1 Full Option Set Tamiya Scania 770S 8x4/4The RS1 Full Option Set for the Scania 770S 8x4/4 provides a comprehensive electronics package integrating driving function, sound, and extended lighting into a single system.The central RS1 control unit manages driving function, sound, and all light modules to ensure coordinated operation of all components.The set includes vehicle-specific headlights and taillights as well as extensive front and roof lighting that visually and functionally complement the model. All modules are connected via the KraftwerK EasyBus for a clean and tidy installation.The headlights are equipped with LEDs for low beam, high beam, daytime running lights, and fog lights. Additionally, LED strips for daytime running lights and blinkers with a sweeping effect provide uniform front illumination. Side marker lights with wired LEDs are also integrated into the system.For use as a work or emergency vehicle, the set offers extended roof lighting including roof beacons, a powerful warning bar, and complete Scania 770S roof lighting with lamp brackets and matching LEDs for authentic lighting appearance.A complete work lighting system with powerful LED units at the front, sides, and rear ensures operational readiness under low-light conditions.The RS1 Full Option Set covers all relevant electronic functions for the Scania 770S 8x4 and fully equips the model technically.FunctionsControl of driving function, sound, and light modules via RS1 unitLED headlights with low beam, high beam, daytime running lights, and fog lightsLED strips for daytime running lights and blinkers with sweeping effectSide marker lights with LEDsExtended roof lighting with roof beacons and warning barComplete Scania 770S roof lighting with lamp brackets and LEDsComplete work lighting at front, sides, and rearSpecial FeaturesVehicle-specific lighting components for Scania 770S 8x4/4Clean module connection via KraftwerK EasyBusPowerful LED units for various lighting functionsLieferumfangRS1 control unitScania 770S headlightsScania 770S 8x4 taillightsRoof warning bar and roof beaconsScania 770S roof lighting including KLB12 roof, roof lamps, and LEDs for lamp bracketsScania 770S front lighting including KLB8-20, grille lamps, and 4 LEDsComplete work lighting (front, side, rear)4 Ohm speaker

RS1 Full Option Set TAMIYA Scania R470 / R620The RS1 Full Option Set for the TAMIYA Scania R470 and R620 is a compact electronic system that integrates driving functions, sound, and advanced lighting. The RS1 module combines the speed controller, sound module, and light control, connecting all lighting components via the KraftwerK EasyBus into a modular and expandable system.The headlights are equipped with LEDs for low beam, high beam, daytime running lights, and fog lights. Additionally, side marker lights with integrated LEDs are connected to the headlights for enhanced lighting functionality.FunctionsIntegration of speed controller, sound module, and light control within the RS1 moduleLED light boards for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsConnection of all lighting components via KraftwerK EasyBusFeaturesCompact, modularly expandable electronic systemComplete integration of all components into the EasyBusScope of DeliveryRS1 control unitFront light boardsRear light boards4 Ohm speaker

RS1 Full Option Set TAMIYA Volvo FH12The RS1 Full Option Set for the TAMIYA Volvo FH12 is a compact electronic system that combines drive control, sound, and advanced lighting into one module. The RS1 integrates the speed controller, sound module, and light control, enabling connection of all lighting components through the KraftwerK EasyBus for a modular and expandable setup.The headlights feature LEDs for low beam, high beam, daytime running lights, and fog lights. In addition, side marker lights with integrated LEDs are included and connected to the headlights.FunctionsIntegration of speed controller, sound module, and light control in the RS1 moduleLED light boards for low beam, high beam, daytime running lights, and fog lightsSide marker lights with integrated LEDsConnection of all lighting components via KraftwerK EasyBusSpecial FeaturesCompact, modular expandable electronic systemComplete integration of all components within the EasyBusScope of DeliveryRS1 control unitFront light boardsRear light boards4 Ohm speaker

RS1 Full Option Set Tamiya Volvo FH16 Tow TruckThe RS1 Full Option Set is specifically designed for the TAMIYA Volvo FH16 Tow Truck and includes driving, sound, and lighting modules with realistic illumination. It accurately replicates the tow vehicle and features front headlights, taillights, as well as warning and position lights on the body.FunctionsHeadlights with turn signals and dynamic wipe effectDriving lights with special lens and three LEDs for adaptive cornering lightHeadlight leveling simulation when switched onModel-specific taillights with turn signals and dynamic wipe effectVolvo roof lighting with KLB8 unit powering light bar and marker lightsMarker lights with 18 side position and clearance lightsWarning bar with 30 LEDs, multiple flashing and blinking patterns, EasyBus compatibleLight bridge with two turn signal LEDs and two work lights behind the cabPre-assembled, neatly wired modules for easy integration into the RS1 systemSpecial FeaturesComplete RS1 set for driving, sound, and lighting functions on the TAMIYA Volvo FH16 Tow TruckFront headlights with dynamic wipe effect and adaptive cornering lightLeveling simulation upon activationComplete taillights with dynamic wipe effectVolvo roof lighting with KLB8 unitIncludes marker bar, warning bar, and light bridgeSpecially matched, pre-assembled modules for the TAMIYA Volvo FH16 Tow TruckScope of DeliveryRS1 control unitVolvo FH16 headlightsVolvo FH16 taillights for wood transporterVolvo FH16 roof lightingVolvo FH16 Tow Truck marker lightsVolvo FH16 Tow Truck warning barVolvo FH16 Tow Truck light bridge4 Ohm speaker

RS1 Full Option Set for TAMIYA Volvo FH16 XL 750 4x2The RS1 Full Option Set is designed for the TAMIYA Volvo FH16 XL 750 4x2 tow truck model. It includes driving, sound, and lighting modules with realistic illumination effects. The set accurately represents the tow truck and features front headlights, rear lights, as well as warning and position lights integrated into the body.FunctionsHeadlights with turn signals and dynamic wipe effectDriving lights with special lens and three LEDs for adaptive cornering lightHeadlight leveling simulation when switched onModel-specific rear lights with turn signals and dynamic wipe effectVolvo roof lighting using the KLB8 unit supplying lamp bars and clearance lightsLight bars for roof and grilleReady-to-install, neatly wired modules for easy integration into the RS1 systemSpecial FeaturesComplete RS1 set for driving, sound, and lighting functions on the TAMIYA Volvo FH16 XL 750 4x2Front headlights with dynamic wipe effect and adaptive cornering lightLeveling simulation at switch-onComplete rear lights with dynamic wipe effectVolvo roof lighting with KLB8 unitLight bars for roof and grille includedSpecifically tuned, ready-to-install modules for the TAMIYA Volvo FH16 XL 750Scope of DeliveryRS1 control unitVolvo FH16 headlightsVolvo FH16 XL 750 4x2 rear lightsVolvo FH16 roof lightingVolvo FH16 light bars for roof and grille4 Ohm speaker