Modellbau Elektronik für RC Trucks und Baumaschinen

RS1 ESC-Sound CombinationThe RS1 ESC-Sound Combination integrates an electronic speed controller, sound module, and lighting system into a compact unit. It connects to up to five receiver channels and supports SUMD, IBUS, and SBUS protocols, enabling up to 32 channels within the system.FunctionsSpeed controller continuously rated at 25A, 32 kHz control suitable for brushed and bell rotor motorsSupports gearboxes with up to four gearsIncludes clutch function, handbrake, and optional inertia simulationCruise control function using throttle stick deflection and button activationSound module with unlimited sound snippets and four audio tracksSpeed-adapted sound playback with crossfading capabilityPreinstalled with six high-quality sounds and expandable sound libraryExpandable via six EasyBus outputs and four plug-in sockets for additional modulesVersatile connections for battery, motor, servos, bus and switching outputs, infrared transmitter, and speakerLighting system control through control pad or customizable channel assignmentExtensive integrated lighting and servo functionsSpecial FeaturesRobust speed controller with protection against battery undervoltage, motor short circuit, and overheatingSound module supports playback modes: key, loop, once, permanent, random, and stop pointsCompatible with WAV and MP3 formats with automatic sample rate conversionSupports SD cards up to 32 GBLighting functions include hazard lights, turn signals, parking lights, low beam, high beam, fog lights, daytime running lights, tail lights, brake lights, cornering lights, strobe, and other effectsServo functions with proportional control, two- and three-position switches, and motor controls for tipper, gearbox, and trailer supportsScope of DeliveryRS1 ESC-Sound CombinationVolume potentiometerOn-Off-Standby switch3 jumpersInfrared transmitting diode

KraftwerK BL15 – Brushless Plug-in Controller for the EasyBus SystemThe BL15 is a compact plug-in module specifically designed for the KraftwerK RS1. It functions as a brushless controller for precise control of hydraulic pumps.The module receives both battery voltage and all control signals directly via the RS1 plug contacts, eliminating the need for additional connection cables. Only the pump motor cables need to be connected.Especially in models with short driver cabins or limited installation space, the BL15 convinces with its minimal space requirements and often enables the complete removal of the interior.FunctionsBrushless controller specifically for the KraftwerK RS1Optimal control of hydraulic pumpsPower supply and control signals entirely via RS1 plug contactsNo additional connection cables required – only motor cables neededPlug-and-play mounting directly on the RS1Configuration via the KraftwerK ControlPanelNo programming skills requiredSpecial FeaturesIdeal for space-limited models such as tipper vehiclesOften enables preservation or removal of the interiorCompatible with the EasyBus systemScope of DeliveryKraftwerK BL15 brushless plug-in module

EasyBus Lighting System TrailerThe EasyBus lighting system for trailers is a fully integrated, modern, and powerful lighting solution designed for model trailers. It operates as a true plug-and-play system that is easy to connect, pair, and use immediately. All lighting, switching, and proportional functions are transmitted wirelessly and without delay from the tractor unit, reliably over distances up to 1.5 meters.The system receives all information from the tractor unit, including lighting functions, switching states, and proportional controls. Transmission is effective within an angle of up to 90°. Lighting boards can be connected directly via EasyBus without requiring additional modules or adapters.The central component is the KIEB 6/2/2 module, featuring six 500 mA switching outputs, two servo outputs, and two motor outputs. Motor outputs can be used to operate trailer supports, dump beds, or other drives. Servo outputs can be utilized for steerable axles or brushless controllers for hydraulic pumps. For LED operation on switching outputs, series resistors (e.g., 180 ohms) are required. Three EasyBus outputs allow connection of additional expansion modules.The lighting system is flexibly expandable and can be seamlessly integrated into existing EasyBus systems. It is suitable for all trailer types, including tipper, low loader, and timber transporter.FunctionsPlug-and-play: easy to connect and operateOne pair of motor outputs for trailer supports, dump beds, or other drivesTwo freely configurable servo outputs, e.g., for steerable axles or controllersCompatible with brushless controllers for hydraulic pumpsReceives all lighting, switching, and proportional functions from the tractor unitRange up to approx. 1.5 m or an angle of up to 90°Direct connection of lighting boards via EasyBus without additional modulesThree EasyBus outputs for expansion with modulesLED operation on switching outputs requires series resistors (e.g., 180 ohms)Special FeaturesIntegrated KIEB 6/2/2 module with 6 switching outputs, 2 servo, and 2 motor outputsSeamless integration into existing EasyBus systemsSuitable for all trailer types such as tipper, low loader, and timber transporterScope of DeliveryKIEB 6/2/2 module (6× 500 mA switching outputs, 2× servo outputs, 2× motor outputs)Veroma Euro rear light boardsVeroma Euro housing (mechanically processed)

KraftwerK Pad RS1 The KraftwerK Pad RS1 enables direct and intuitive control of all RS1-specific functions. It occupies only one proportional channel and is therefore compatible with all remote controls. The RS1 fully processes the signals to ensure precise operation of vehicle, engine, and sound functions. The 2025 generation is equipped with a central RGB LED that visually displays all inputs. It signals short and long presses with colors, confirms switching to the additional level, and visualizes the control ranges when pressing the setup button. This provides the user with a clear overview of the current operating status at all times. Functions The pad differentiates between short (orange symbols), long (white symbols), and level functions (gray symbols). This allows all RS1 functions to be controlled directly and clearly: RS1 functions via short presses (orange symbols) MP3 player: Play / Stop Fanfare Horn Gear selection: Plus / Minus Ignition Start / Stop Engine brake Cruise control Flash to pass RS1 functions via long presses (white symbols) MP3 player: Forward / Reverse Volume (overall) Unlock False start Load User-defined function 1 User-defined function 2 RS1 functions via level switching (gray symbols) Switch fanfare Horn Radio / MP3 volume Compatibility Compatible with all remote controls (learning mode required) Occupies only one proportional channel Signal processing fully handled by the RS1 Technical Data Power supply: via remote control channel Max. current consumption: 20 mA Number of buttons: 12 (range 28–100% in 14.5% steps) Controllable functions: up to 45 Remote control systems: all with proportional channel Long press: from approx. 0.5 s Dimensions: 78 × 33 mm Connection Note The used channel must be a proportional channel, as a servo at the receiver output must be continuously movable. Switch channels are not suitable.

Premiumsound Scania V8 OpenPipeThe Premiumsound Scania V8 OpenPipe is a specially developed sound package for the KraftwerK RS1 system. It simulates an open exhaust system with flap control and provides a realistic, dynamic sound characteristic precisely tuned to the Scania V8.The virtual exhaust flap is controlled via the RS1 load sound track during load changes, producing a powerful, deep engine sound. The sound change occurs dynamically and without delay, even while driving and regardless of engine speed. This ensures a stable and authentic sound profile across the entire RPM range.An audible blow-off valve is simulated during rapid RPM reduction, creating a pressurized sound image that realistically reproduces the character of the open Scania V8 engine.Premium sounds can be purchased in the shop and loaded directly onto the RS1 module via the ControlPanel under Sound Settings → PremiumSounds. Activation is secured via email address and password or order number. Each premium sound is linked to a single RS1 module and cannot be used multiple times.FunctionsSimulates an open exhaust system with flap controlVirtual exhaust flap opens during load changes via the RS1 load sound trackDynamic, powerful deep engine sound across the entire RPM rangeBlow-off valve during rapid RPM reductionActivation via email address, password, or order numberInstallation via ControlPanel → Sound Settings → PremiumSoundsFeaturesManufacturer-tuned premium sound for the KraftwerK RS1 systemOne-time activation, linked to a single RS1 moduleStable and authentic sound without waiting or loading timesRealistic reproduction of the open Scania V8 engine soundScope of Delivery1× Premiumsound Scania V8 OpenPipe (digital download, module-bound)

FrSky TANDEM XE TransmitterThe FrSky TANDEM XE transmitter is based on the TANDEM series featuring 2.4G and 868MHz dual-band technology. It is the largest transmitter in the series, designed specifically for RC users who prefer a desk transmitter layout combined with extensive switch input flexibility. The design and high-quality manufacturing offer a clear upgrade for TARANIS X9E users.FunctionsKraftwerK Pad integratedTruck model configuredThrottle ratchet function removedMixers preconfiguredSystem language set to GermanOptimized behavior: reduced volume and haptic motor intensitySpecial FeaturesDual-screen color display designMain screen: 4.3-inch color touchscreen for ETHOS system operations such as model configurationSecondary screen: 2.4-inch color display on top, freely programmable (e.g., via Lua scripting)Built-in 8GB flash memory with SD card slotIncluded 4000mAh LiPo battery with expandable battery compartment for larger packsIntegrated charging electronics via USB-CAcrylic plastic housing plateModular design with interchangeable blocks and multiple custom inputsMC11 gimbals featuring hall sensors and 10 ball bearings, adjustable stick travel angles of 45° or 60°6 trims, 4 recessed rotary potentiometers, 2 full-metal side levers, and 2 linear sliders6 individually assignable quick mode buttonsLite-type external module bayFoldable transmitter strapBuilt-in internal TANDEM 868MHz/2.4GHz dual-band RF moduleHaptic vibration alerts and voice outputWireless high-speed PARA training system compatible with FreeLink App 3.0Large battery compartment supporting higher capacity batteriesTechnical DataDimensions: 345 × 262 × 82 mmWeight: 1357 g without battery, 1492 g with batteryOperating system: ETHOSRF module: TD-ISRMChannels: 24Voltage range: 6.5 – 8.4 V (2S Li battery)Operating temperature range: -10 °C to 60 °CBattery compartment size: 86 × 61 × 20 mmMain display resolution: 4.3" touchscreen, 800 × 480 pixelsSecondary display resolution: 2.4", 320 × 240 pixelsCompatibility: ACCST D16, ACCESS 2.4G, ACCESS 868 MHz, TD ModeDelivery ContentsTANDEM XE Carbon transmitter with LiPo battery (Mode 2)Mounted 3D gimbal sticksUSB data and charging cableTransmitter strapAluminum caseQuick guide in EnglishPreparation for KraftwerK RS1 (Pad, truck model, mixers, German language, throttle ratchet removed, optimized behavior)

FS Reflex Stick Multi PRO LCD 2.4 GHz with KraftwerK PadThe FS Reflex Stick Multi Pro LCD 14Ch from Carson is a remote control system with 14 channels and 15 model memories, compatible with TAMIYA MFC 01/03 and DMD for RC vehicles and ships.Functions14 controllable channels15 model memories2.4 GHz FHSS system (Frequency Hopping Spread Spectrum)Servo reverse (direction reversal) and trim function for channels4 push buttons (ON/OFF/ON), 4 switches (ON/OFF/ON), 2 rotary potentiometersDual rate for channels 1-4 (servo travel limitation)EPA channel 1-4 (servo travel adjustment)EXP function channel 1-4 (exponential)Failsafe functionGraupner J/R connector systemIntegrated charging socketSpecial featuresBlue backlit LCD display100% compatible with TAMIYA MFC 01/03 and DMD unitOperates with 4 AA batteries (4.8–6 V)Scope of deliveryTransmitterReceiverManualKraftwerK Pad with light and sound, pre-installed