Fernsteuerungen

FS Reflex Stick Multi PRO LCD 2.4 GHz with KraftwerK PadThe FS Reflex Stick Multi Pro LCD 14Ch from Carson is a remote control system with 14 channels and 15 model memories, compatible with TAMIYA MFC 01/03 and DMD for RC vehicles and ships.Functions14 controllable channels15 model memories2.4 GHz FHSS system (Frequency Hopping Spread Spectrum)Servo reverse (direction reversal) and trim function for channels4 push buttons (ON/OFF/ON), 4 switches (ON/OFF/ON), 2 rotary potentiometersDual rate for channels 1-4 (servo travel limitation)EPA channel 1-4 (servo travel adjustment)EXP function channel 1-4 (exponential)Failsafe functionGraupner J/R connector systemIntegrated charging socketSpecial featuresBlue backlit LCD display100% compatible with TAMIYA MFC 01/03 and DMD unitOperates with 4 AA batteries (4.8–6 V)Scope of deliveryTransmitterReceiverManualKraftwerK Pad with light and sound, pre-installed

FrSky TANDEM XE TransmitterThe FrSky TANDEM XE transmitter is based on the TANDEM series using 2.4 GHz and 868 MHz dual-band technology. It is the largest model in the TANDEM series, designed for RC users who prefer a desk transmitter layout with flexible and numerous switch inputs. The transmitter features high-quality construction and is an upgrade for TARANIS X9E users.FunctionsKraftwerK Pad integratedTruck model configuredThrottle ratchet function removedPreconfigured mixersSystem language set to GermanOptimized behavior: volume reduced, haptic motor reducedSpecial featuresMain screen: 4.3-inch color touchscreen for ETHOS (e.g., model configuration)Second screen: 2.4-inch color display on top, freely programmable (e.g., via Lua)Built-in 8GB flash memory plus SD card slotSupplied 4000mAh LiPo battery, expandable battery compartment for larger packsIntegrated charging electronics (USB-C)Acrylic plastic housing plateModular design with replaceable blocks for custom multiple inputsMC11 gimbals with Hall sensor and 10 ball bearings, adjustable 45° / 60° stick travel6 trims, 4 recessed rotary potentiometers, 2 full-metal side levers, 2 linear sliders6 individually assignable quick-mode buttonsLite-type external module bayFoldable transmitter suspensionBuilt-in internal Tandem 868MHz/2.4GHz dual-band RF moduleHaptic vibration alerts and voice outputWireless high-speed PARA training system compatible with FreeLink App 3.0Large battery compartment for upgrading battery capacityTechnical dataDimensions: 345 × 262 × 82 mmWeight: 1357 g (without battery) / 1492 g (with battery)Operating system: ETHOSRF module: TD-ISRMChannels: 24Voltage: 6.5 – 8.4 V (2S Li battery)Temperature range: -10 °C to 60 °CBattery compartment size: 86 × 61 × 20 mmMain display: 4.3" touchscreen, 800 × 480Additional display: 2.4", 320 × 240Compatibility: ACCST D16, ACCESS 2.4G, ACCESS 868 MHz, TD ModeLieferumfangTANDEM XE Carbon with LiPo battery (Mode 2)Mounted 3D gimbal sticksUSB data and charging cableTransmitter strapAluminum caseQuick guide (English)Preparation for KraftwerK RS1 (Pad, Truck model, mixers, German language, throttle ratchet removed, optimized behavior)

FrSky TANDEM XE TransmitterThe FrSky TANDEM XE transmitter is based on the TANDEM series featuring 2.4G and 868MHz dual-band technology. It is the largest transmitter in the series, designed specifically for RC users who prefer a desk transmitter layout combined with extensive switch input flexibility. The design and high-quality manufacturing offer a clear upgrade for TARANIS X9E users.FunctionsKraftwerK Pad integratedTruck model configuredThrottle ratchet function removedMixers preconfiguredSystem language set to GermanOptimized behavior: reduced volume and haptic motor intensitySpecial FeaturesDual-screen color display designMain screen: 4.3-inch color touchscreen for ETHOS system operations such as model configurationSecondary screen: 2.4-inch color display on top, freely programmable (e.g., via Lua scripting)Built-in 8GB flash memory with SD card slotIncluded 4000mAh LiPo battery with expandable battery compartment for larger packsIntegrated charging electronics via USB-CAcrylic plastic housing plateModular design with interchangeable blocks and multiple custom inputsMC11 gimbals featuring hall sensors and 10 ball bearings, adjustable stick travel angles of 45° or 60°6 trims, 4 recessed rotary potentiometers, 2 full-metal side levers, and 2 linear sliders6 individually assignable quick mode buttonsLite-type external module bayFoldable transmitter strapBuilt-in internal TANDEM 868MHz/2.4GHz dual-band RF moduleHaptic vibration alerts and voice outputWireless high-speed PARA training system compatible with FreeLink App 3.0Large battery compartment supporting higher capacity batteriesTechnical DataDimensions: 345 × 262 × 82 mmWeight: 1357 g without battery, 1492 g with batteryOperating system: ETHOSRF module: TD-ISRMChannels: 24Voltage range: 6.5 – 8.4 V (2S Li battery)Operating temperature range: -10 °C to 60 °CBattery compartment size: 86 × 61 × 20 mmMain display resolution: 4.3" touchscreen, 800 × 480 pixelsSecondary display resolution: 2.4", 320 × 240 pixelsCompatibility: ACCST D16, ACCESS 2.4G, ACCESS 868 MHz, TD ModeDelivery ContentsTANDEM XE Carbon transmitter with LiPo battery (Mode 2)Mounted 3D gimbal sticksUSB data and charging cableTransmitter strapAluminum caseQuick guide in EnglishPreparation for KraftwerK RS1 (Pad, truck model, mixers, German language, throttle ratchet removed, optimized behavior)

FrSky Taranis Q X7 ACCESS Transmitter with Carry Strap, WhiteThe TARANIS Q X7 ACCESS is a 16- to 24-channel remote control transmitter featuring a digital high-speed module interface and OpenTX operating system.FunctionsUp to 24 channels with faster baud rate and reduced latencyHaptic vibration moduleVoice and tone outputBall-bearing gimbal assemblies6 switches and 2 rotary potentiometersOpenTX operating systemSecure and reliable connection with OTA firmware updatesSD card slot for unlimited model storageUSB port for updates, data transfer, and battery charging (2x 18650 Li-ion batteries)Adjustable gimbal assemblies via screws (mode setting)Full telemetry capability and RSSI signal strength feedbackMenu navigation via rotary encoder and buttonsBacklit displayAudio jack for headphonesTrainer port for instructor-student flying and simulator operationExternal module bay for third-party RF modulesCompatible with FrSky XJT module for up to 32 channelsReceiver Match functionReal-time flight data loggingSuper low latency for precise flyingSpecial FeaturesErgonomic and compact designSupports spectrum analyzer functionAudio voice output of values, alarms, and settingsRSSI signal strength warning alertsVibration alarmsWired training function supportedModel configuration files compatible with TARANIS X9D PlusEasily accessible battery compartmentDelivery Contents1 x Taranis Q X7 white Mode 2 (mode switchable)1 x Quick start guide in German1 x Carry strap1 x USB data and charging cable1 x 4GB SD card1 x KraftwerK Pad with light and sound installedNote: Transmitter battery not included. Compatible with interchangeable 18650 lithium-ion batteries.

KraftwerK Pad Light and Sound The KraftwerK Pad Light and Sound allows simple and convenient control of all light and sound functions of your KraftwerK system via button press. It occupies only one proportional channel and does not require complex multiswitch signals. Due to this straightforward operation, it is compatible with all remote controls and can be easily integrated into existing models. Additionally, the pad is fully compatible with the Beier SFR-1 and USM-RC3. The 2025 generation is equipped with a central RGB LED that visually indicates all inputs. It signals short and long presses by color, confirms switching to the additional level and back, and visualizes the control ranges when pressing the setup button. This provides the user with clear feedback on the current operating status of the pad at all times. Functions The pad differentiates between short (orange symbols) and long presses (white symbols), allowing control of numerous functions: Short presses (orange symbols) All light functions Rotating beacon Fifth wheel coupling Additional functions via level switching Long presses (white symbols) Trailer supports Tipper Ramp Gearbox Servo 1 and Servo 2 Flashing light Horn All On/Off Engine Start/Stop Up to 22 additional functions can be controlled via the level switch (top left button) – eleven each via short and long presses. Special mode for fine adjustments If one of the buttons 1–8 is pressed and held, the system switches to a special mode where the respective function can be finely adjusted afterwards. Example: Holding the flashing light button dims the driving lights. Afterwards, brightness can be adjusted stepwise with short presses. This mode also applies to supports, ramp, tipper, and horn. After approximately one second without input, the pad automatically returns to normal assignment. Tip With the "simple switch" function of the light modules or switch extensions, all outputs can be assigned any functions. For example, the pad's servo functions can be used to switch work lights or additional lighting. Compatibility Compatible with all remote controls (learning mode required) Occupies only one proportional channel Can operate on an occupied channel if it is unused and remains in neutral position Signal evaluation occurs in RS1, KLM, SFR-1, or USM-RC3 Supports older modules such as KLM 4/0 and KLM 4/12–500 (after update) Full compatibility with Beier SFR-1 Technical data Power supply: via the remote control channel Maximum current consumption: 20 mA Number of buttons: 12 (travel 28–100 % in 14.5 % steps) Controllable functions: up to 45 Speed controllers: all compatible Sound modules: Servonaut, Beier Remote control systems: all with proportional channel Long press: from approx. 0.5 seconds Dimensions: 78 × 33 mm Note on connection The connected channel must be a proportional channel – a servo at the corresponding receiver output must be able to move continuously. Switch channels are not suitable.

KraftwerK Pad RS1 The KraftwerK Pad RS1 enables direct and intuitive control of all RS1-specific functions. It occupies only one proportional channel and is therefore compatible with all remote controls. The RS1 fully processes the signals to ensure precise operation of vehicle, engine, and sound functions. The 2025 generation is equipped with a central RGB LED that visually displays all inputs. It signals short and long presses with colors, confirms switching to the additional level, and visualizes the control ranges when pressing the setup button. This provides the user with a clear overview of the current operating status at all times. Functions The pad differentiates between short (orange symbols), long (white symbols), and level functions (gray symbols). This allows all RS1 functions to be controlled directly and clearly: RS1 functions via short presses (orange symbols) MP3 player: Play / Stop Fanfare Horn Gear selection: Plus / Minus Ignition Start / Stop Engine brake Cruise control Flash to pass RS1 functions via long presses (white symbols) MP3 player: Forward / Reverse Volume (overall) Unlock False start Load User-defined function 1 User-defined function 2 RS1 functions via level switching (gray symbols) Switch fanfare Horn Radio / MP3 volume Compatibility Compatible with all remote controls (learning mode required) Occupies only one proportional channel Signal processing fully handled by the RS1 Technical Data Power supply: via remote control channel Max. current consumption: 20 mA Number of buttons: 12 (range 28–100% in 14.5% steps) Controllable functions: up to 45 Remote control systems: all with proportional channel Long press: from approx. 0.5 s Dimensions: 78 × 33 mm Connection Note The used channel must be a proportional channel, as a servo at the receiver output must be continuously movable. Switch channels are not suitable.

Pad Holder L&S Mounting SystemThe Pad Holder L&S consists of a base plate with elongated holes on three sides, two arms, and two brackets with variable drilling. This versatile mounting system allows numerous mounting options and can be optimally adapted to different requirements.FunctionsBase plate with elongated holes on three sidesTwo armsTwo brackets with variable drillingVersatile mounting optionsAdaptable to different requirementsDelivery ContentsPad Holder L&S