KIEB 6/2/2 Infrared Receiver

KIEB 6/2/2 Infrared Receiver for EasyBus Trailers

The KIEB 6/2/2 infrared receiver serves as the central communication module for EasyBus trailers, reliably receiving all data from RS1, KLM, or KIES transmitters. It wirelessly transmits all lighting, switching, and proportional functions and outputs them via integrated outputs or the EasyBus to lighting boards and expansion modules. This makes it suitable for various trailer types, including tippers, low loaders, and specialized body configurations.

The receiver provides six powerful 500 mA switching outputs, two servo outputs, and two motor outputs, enabling precise control of lighting and mechanical functions such as trailer supports, spindle drives, bodies, or ramps. Additional servos or controllers, such as brushless controllers for modern hydraulic pumps, can be operated via the servo outputs. LEDs can be connected directly to the switching outputs with appropriate resistors (e.g., 180 Ohm). The three EasyBus outputs allow connection to additional lighting boards and expansion modules.

The maximum operating range is approximately 1.5 m, with an opening angle of up to 90° to the sending diode. Reception sensitivity is adjustable via an integrated potentiometer, while transmission power can be set on the RS1, KLM, or KIES transmitter.

Functions

• Receives all control data from the infrared transmitter (RS1, KLM, or KIES)
• Two motor outputs for controlling trailer supports, spindle drives, bodies, or ramps
• Two freely programmable servo outputs for steering axles, lift axles, locks, or controllers
• Six 500 mA switching outputs for additional lighting or rotating beacons
• Three EasyBus outputs for expansion with lighting boards and modules
• LED operation directly via switching outputs with appropriate resistors (e.g., 180 Ohm)
• Range up to 1.5 m, maximum angle to sending diode 90°
• Integrated potentiometer for fine adjustment of reception sensitivity
• Adjustable transmission power on RS1, KLM, or KIES

Features

• Compact dimensions: 60 mm × 40 mm × 12.5 mm
• No integrated BEC – battery voltage is present on the servo outputs (see tip 1)

Scope of Delivery

• KIEB 6/2/2 infrared receiver
• 30 cm receiving diode
• 60 cm double connection cable for connection to the tractor for adjustments