Auflieger / Trailer

EasyBus Circuit Boards for Veroma Euro Tail LightsEasyBus circuit boards for Veroma Euro tail lights are high-quality lighting boards designed specifically for the 7-chamber tail light from Veroma.Each module is equipped with seven powerful SMD LEDs and includes an output with an integrated resistor on the rear side. This output allows flexible assignment, for example, for marker lights or license plate illumination.The boards connect directly to the EasyBus outputs of the light assistants and are easy to plug in and immediately operational.All eight outputs can be individually adjusted using the Kraftwerk ControlPanel to optimally meet the requirements.Note: Due to the use of larger and brighter LEDs, the rear cover of the lamp housing must be removed. This eliminates the mounting holes, so the lamp housing must be glued to the model.FunctionsEquipped with seven powerful SMD LEDsOutput with integrated resistor on the rear sideFlexible output assignment, e.g., for marker lights or license plate illuminationDirect connection to EasyBus outputs of the light assistantsIndividual adjustment of all eight outputs via Kraftwerk ControlPanelSpecial FeaturesUse of larger and brighter LEDsRemoval of the lamp housing rear cover requiredMounting holes eliminated, lamp housing must be glued to the modelScope of DeliveryEasyBus circuit boards for Veroma Euro tail lights

EasyBus Lighting System TrailerThe EasyBus lighting system for trailers is a fully integrated, modern, and powerful lighting solution designed for model trailers. It operates as a true plug-and-play system that is easy to connect, pair, and use immediately. All lighting, switching, and proportional functions are transmitted wirelessly and without delay from the tractor unit, reliably over distances up to 1.5 meters.The system receives all information from the tractor unit, including lighting functions, switching states, and proportional controls. Transmission is effective within an angle of up to 90°. Lighting boards can be connected directly via EasyBus without requiring additional modules or adapters.The central component is the KIEB 6/2/2 module, featuring six 500 mA switching outputs, two servo outputs, and two motor outputs. Motor outputs can be used to operate trailer supports, dump beds, or other drives. Servo outputs can be utilized for steerable axles or brushless controllers for hydraulic pumps. For LED operation on switching outputs, series resistors (e.g., 180 ohms) are required. Three EasyBus outputs allow connection of additional expansion modules.The lighting system is flexibly expandable and can be seamlessly integrated into existing EasyBus systems. It is suitable for all trailer types, including tipper, low loader, and timber transporter.FunctionsPlug-and-play: easy to connect and operateOne pair of motor outputs for trailer supports, dump beds, or other drivesTwo freely configurable servo outputs, e.g., for steerable axles or controllersCompatible with brushless controllers for hydraulic pumpsReceives all lighting, switching, and proportional functions from the tractor unitRange up to approx. 1.5 m or an angle of up to 90°Direct connection of lighting boards via EasyBus without additional modulesThree EasyBus outputs for expansion with modulesLED operation on switching outputs requires series resistors (e.g., 180 ohms)Special FeaturesIntegrated KIEB 6/2/2 module with 6 switching outputs, 2 servo, and 2 motor outputsSeamless integration into existing EasyBus systemsSuitable for all trailer types such as tipper, low loader, and timber transporterScope of DeliveryKIEB 6/2/2 module (6× 500 mA switching outputs, 2× servo outputs, 2× motor outputs)Veroma Euro rear light boardsVeroma Euro housing (mechanically processed)

EasyBus Lighting System Trailer KöBoThe EasyBus Lighting System Trailer KöBo is an integrated lighting solution designed for model assemblies with plug-and-play functionality, enabling quick connection, coupling, and immediate commissioning.All light, switch, and proportional functions are transmitted wirelessly, reliably, and without delay from the towing vehicle, even over distances up to 1.5 meters and angles up to 90°.The system comprehensively receives control information from the towing vehicle, including all lighting functions, switch states, and proportional functions. Lighting boards can be connected directly via EasyBus without requiring additional modules or adapters.The central component is the KIEB 6/2/2 module with six 500 mA switch outputs, two servo outputs, and two motor outputs. The motor outputs control trailer supports or beds, while the servo outputs control servos and brushless controllers for hydraulic pumps.For operating LEDs on the switch outputs, series resistors (e.g., 180 Ohm) are required. Three EasyBus outputs provide additional expansion options.The lighting system is flexibly expandable and can be seamlessly integrated into existing EasyBus systems. It is suitable for all trailer types such as tippers, low loaders, and timber transporters.The delivery includes the kingpin, which securely holds the receiving diode, offers a low installation height, and is height adjustable.FunctionsPlug-and-play system for simple and fast commissioningMotor output pair for controlling trailer supports, beds, or other drivesTwo freely programmable servo outputs, e.g., for steerable axles or controllersCompatible with brushless controllers for hydraulic pumpsWireless transmission of all light, switch, and proportional functions from the towing vehicleRange up to approx. 1.5 m or angles up to 90°Direct connection of lighting boards via EasyBus without additional modulesThree EasyBus outputs for additional expansionsSeries resistors (e.g., 180 Ohm) required for LED operation on switch outputsSpecial FeaturesKIEB 6/2/2 module with 6× 500 mA switch outputs, 2× servo outputs, and 2× motor outputsMotor outputs for controlling trailer supports or bedsServo outputs for servos and brushless controllersLow installation height and height-adjustable kingpinScope of DeliveryKIEB 6/2/2 module (6× 500 mA switch outputs, 2× servo outputs, 2× motor outputs)Veroma Euro rear light boardsVeroma Euro housing (mechanically processed)Kingpin optimized for the receiving diode

KIEB 6/2/2 Infrared Receiver for EasyBus TrailersThe KIEB 6/2/2 infrared receiver serves as the central communication module for EasyBus trailers, reliably receiving all data from RS1, KLM, or KIES transmitters. It wirelessly transmits all lighting, switching, and proportional functions and outputs them via integrated outputs or the EasyBus to lighting boards and expansion modules. This makes it suitable for various trailer types, including tippers, low loaders, and specialized body configurations.The receiver provides six powerful 500 mA switching outputs, two servo outputs, and two motor outputs, enabling precise control of lighting and mechanical functions such as trailer supports, spindle drives, bodies, or ramps. Additional servos or controllers, such as brushless controllers for modern hydraulic pumps, can be operated via the servo outputs. LEDs can be connected directly to the switching outputs with appropriate resistors (e.g., 180 Ohm). The three EasyBus outputs allow connection to additional lighting boards and expansion modules.The maximum operating range is approximately 1.5 m, with an opening angle of up to 90° to the sending diode. Reception sensitivity is adjustable via an integrated potentiometer, while transmission power can be set on the RS1, KLM, or KIES transmitter.FunctionsReceives all control data from the infrared transmitter (RS1, KLM, or KIES)Two motor outputs for controlling trailer supports, spindle drives, bodies, or rampsTwo freely programmable servo outputs for steering axles, lift axles, locks, or controllersSix 500 mA switching outputs for additional lighting or rotating beaconsThree EasyBus outputs for expansion with lighting boards and modulesLED operation directly via switching outputs with appropriate resistors (e.g., 180 Ohm)Range up to 1.5 m, maximum angle to sending diode 90°Integrated potentiometer for fine adjustment of reception sensitivityAdjustable transmission power on RS1, KLM, or KIESFeaturesCompact dimensions: 60 mm × 40 mm × 12.5 mmNo integrated BEC – battery voltage is present on the servo outputs (see tip 1)Scope of DeliveryKIEB 6/2/2 infrared receiver30 cm receiving diode60 cm double connection cable for connection to the tractor for adjustments

KIES Infrared TransmitterThe KIES Infrared Transmitter is a module designed for precise and versatile control of models. It enables simple and reliable transmission of lighting functions, switch states, and servo movements.FunctionsPlug & Play: easy connection and immediate operational readinessServo output for controlling the saddle plateReliable transmission of all lighting functions and switch statesSupports all proportional functions for detailed controlRange up to 1.5 meters with a transmission angle up to 90°Control of servos on trailers, such as steering axlesControl of motor functions on trailers, including supportsSpecial FeaturesSimple expansion of the power plant systemConnection via free EasyBus outputRecommended positioning of the emitting diode on the kingpinOperation over distances greater than one meter and angles up to 90°Five selectable transmission power levels adjustable via system settingsServo output preset for saddle plate control, adjustable as requiredLieferumfangKIES Infrared Transmitter

Modified Housing for Veroma Euro Tail LightsThe housings are specially modified to enable precise and trouble-free installation of the EasyBus circuit boards for Veroma Euro tail lights.The modification results in the omission of mounting holes on the housing, as these are integrated into the circuit board.LieferumfangModified housing for Veroma Euro tail lights