EasyBus Lighting System Trailer KöBo

EasyBus Lighting System Trailer KöBo

The EasyBus Lighting System Trailer KöBo is an integrated lighting solution designed for model assemblies with plug-and-play functionality, enabling quick connection, coupling, and immediate commissioning.

All light, switch, and proportional functions are transmitted wirelessly, reliably, and without delay from the towing vehicle, even over distances up to 1.5 meters and angles up to 90°.

The system comprehensively receives control information from the towing vehicle, including all lighting functions, switch states, and proportional functions. Lighting boards can be connected directly via EasyBus without requiring additional modules or adapters.

The central component is the KIEB 6/2/2 module with six 500 mA switch outputs, two servo outputs, and two motor outputs. The motor outputs control trailer supports or beds, while the servo outputs control servos and brushless controllers for hydraulic pumps.

For operating LEDs on the switch outputs, series resistors (e.g., 180 Ohm) are required. Three EasyBus outputs provide additional expansion options.

The lighting system is flexibly expandable and can be seamlessly integrated into existing EasyBus systems. It is suitable for all trailer types such as tippers, low loaders, and timber transporters.

The delivery includes the kingpin, which securely holds the receiving diode, offers a low installation height, and is height adjustable.

Functions

• Plug-and-play system for simple and fast commissioning
• Motor output pair for controlling trailer supports, beds, or other drives
• Two freely programmable servo outputs, e.g., for steerable axles or controllers
• Compatible with brushless controllers for hydraulic pumps
• Wireless transmission of all light, switch, and proportional functions from the towing vehicle
• Range up to approx. 1.5 m or angles up to 90°
• Direct connection of lighting boards via EasyBus without additional modules
• Three EasyBus outputs for additional expansions
• Series resistors (e.g., 180 Ohm) required for LED operation on switch outputs

Special Features

• KIEB 6/2/2 module with 6× 500 mA switch outputs, 2× servo outputs, and 2× motor outputs
• Motor outputs for controlling trailer supports or beds
• Servo outputs for servos and brushless controllers
• Low installation height and height-adjustable kingpin

Scope of Delivery

• KIEB 6/2/2 module (6× 500 mA switch outputs, 2× servo outputs, 2× motor outputs)
• Veroma Euro rear light boards
• Veroma Euro housing (mechanically processed)
• Kingpin optimized for the receiving diode